Vgs-1 Optional Voice Guide & Storage Unit - Kenwood TK-7360 Instruction Manual

• "BUSY" appears on the display when you press the PTT switch. Use a different channel
or wait until the channel becomes free.
If your dealer has programmed BCL Override for your transceiver, you can
override the BCL by pressing the PTT switch again, immediately after releasing it,
when the channel is busy.
ptt id
PTT ID is the transceiver unique ID code which is sent each time the PTT switch
is pressed and/or released.
c
ompAnder
If programmed by your dealer for a channel, the compander will remove
excessive noise from transmitted signals, providing higher clarity of signals.
t p
rAnSmit ower
Your dealer has programmed a transmit power level for each channel. Power
levels can be high or low.
VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
When using the optional VGS- voice guide & storage unit, you gain access to the
voice recorder and voice announcement functions. Ask your dealer for details.
V r
oice ecorder
The voice recorder provides you with an auto recorder to record your
conversations and a voice memo function to create voice memos.
n Auto Recording
If activated, the auto recording function will continuously record all transmitted
and received signals. The recording storage area retains 30 seconds of
recording, so all transmitted and received signals are simultaneously recorded
and erased, leaving only the last 30 seconds of recording in memory.
• The
is activated.
n Voice Memos
You can record a voice memo for later playback.
1 Press the key programmed as Voice Memo or press and hold the key
programmed as Playback for  second.
• The duration of recording memory will appear on the display and begin counting
down.
2 Speak into the microphone to record your voice memo.
icon appears on the display when the Auto Recording function