Menu Mode; M Enu A Ccess; M Enu C Onfiguration - Kenwood NEXEDGE NX-700 series Instruction Manual

Many functions on this transceiver are selected or configured through the Menu
instead of physical controls. Once you become familiar with the Menu system,
you will appreciate the versatility it offers.
m A
enu cceSS
1 Press the key programmed as Menu.
2 Press the /
• If you are using a microphone keypad, you can directly enter a Menu number to skip
to that Menu.
3 Press the key to set up the selected Menu item.
4 Press the /
• For settings with more than  level, repeat steps 3 and 4.
5 Press the key to set the selected setting and exit Menu mode.
• Press the
• Press the
m c
enu onFigurATion
Some transceiver keys may already be programmed with functions listed in
the Menu. Those functions can be accessed directly by pressing the key, or
by accessing the Menu. All other functions can still be accessed using the
transceiver Menu. The following table lists all the available Menu items.
No. Menu
0 2-TONE
02 AUTO REPLY MSG
03 AUTO TELEPHONE
04 AUTO DIAL
05 AUTO DIAL PROG
06 AUX A
07 AUX B
08 BROADCAST
09 CLOCK
0 CLOCK ADJUST
 DIRECT CH SEL
2 DISP FORMAT
3 FIXED VOLUME
2

MENU MODE

keys to select your desired Menu item.
keys to select your desired setting.
key at any time to return to the previous display.
key at any time to exit Menu mode.
2-tone Mode
Auto Reply Message ON/OFF
Auto Telephone
Autodial Mode
Autodial Programming Mode
AUX A ON/OFF
AUX B ON/OFF
Broadcast ON/OFF
Clock ON/OFF
Clock Adjustment mode
Direct CH/GID  ~ 5 Select
Display Format ON/OFF
Fixed Volume
Description