La Crosse Technology Tomorrow's Weather Today WS-7394U-IT Instruction Manual page 8

B. There are many different modes the indoor weather station can be set
to. The LCD shown is the normal operating mode, and your actual data
shown will be different based on your local settings and conditions.
IV. Function Key Layout
A. The below picture shows the four function keys used in programming
and operation of your indoor weather station
V. Program Mode
The program mode is laid out in a manner that allows you to program each
function separately, or you can follow the instructions entirely to program the
Wireless Weather Station. Complete programming is usually done for the
initial set-up, and will require you to skip step 1,2 and 3 of each programming
section. The programming mode can be exited at any time by either pressing the
"CH" button, or waiting for the 15-second time-out to take effect.
A. Overview of programming mode sequence
1. LCD Contrast
4. Radio-controlled
Time ON/OFF
7. Minute
10. Date
13. Relative pressure
setting
B. LCD Contrast Setting
1. Press and hold the "SET" button for
five seconds.
2. "lcd" will appear at the top of the
display and a number will flash next
to it.
3. Press and release the "OUT/+"
button to select the desired LCD
contrast setting.
2. Time Zone
5. 12/24-hour
time mode
8. Year
11. °F/°C
14. Forecast
sensitivity
8
3. DST ON/OFF
6. Hour
9. Month
12. inHg/hPa