Operating And Setting The Rain Function - La Crosse Technology WS-3610-SAL Quick Setup Manual

Note: Touching the PRESSURE section twice toggles the
display between Relative (rel) and Absolute (abs) air
pressure.
All setting and display options only pertain to the presently
displayed value.
10

Operating and Setting the Rain Function

Note: Besides the direct setting of the units for the rain amount in
the basic setup procedure, it is possible to toggle between
the following displays by touching the left part of the RAIN
section twice:
•
Rain amount for the last hour
•
Rain amount for the last 24 hours
•
Rain amount for the last week
•
Rain amount for the last month
Note: The rain amounts for the last week and the last
month do not represent the amounts collected up to
the present point of time, but to those for the last
complete week or the last complete month.
All setting and display functions pertain only to the
presently displayed value.
Important Note!
Operation and settings of the Rain function are essentially
identical to the ones described in Item 9 above. Therefore a
short description of the minor differences in regards to Item
9 will be a sufficient enough explanation.
•
Since it is not necessary to display minimum rain values, the
menu does not offer the item ‫٭‬MIN‫ ٭‬but ‫٭‬MAX‫ ٭‬only to
display the various maximum rain amounts.
•
Since no minimum rain values are stored, upon activating
the ‫٭‬ALARM‫ ,٭‬the display will immediately proceed to the
high alarm setting as described in section 9 above.
18