Table of Contents
Advertisement
4.
Packaged Contents
Before setting up, carefully unpack the contents onto a table or flat surface and
check that the following are complete:
Item:
Consisting of:
Fittings:
• Main unit
• AD/DC 120V power
Base
Station
• Main unit
• 32ft cable - optional
Thermo-
• Rain protection
Hygro
Sensor
cover
• Wall mounting screws
• Plastic anchors for
• Main unit with
• 2 x U-bolts for mast
Wind
Sensor
wind vane
• 32ft cable
• 4 x Washers
• 4 x Nuts
(already at-
• 1 x screw (to fix main
tached to the
main unit)
• Mast holder
• Main unit (base
Rain
Sensor
and funnel)
• 32ft cable
(already at-
tached to the
main unit)
• 6.5ft PC cable for PC
Heavy
CD-Rom format
weather
(English version
PC
only)
software
Illustration:
Adaptor - optional use
(included)
connection to the base
station (included)
screws
holder
unit to the mast holder
connection - optional
use (included)
5.
Setting up
First, choose to use the adaptor (included in this set) or batteries for operation.
Both these methods allow for operation using wireless 433MHz transmission
or cable connection between the base station and the sensors and setting up
for both methods is as follows:
Base Station:
Operation
Keys
Front Panel
Note: flip open the front panel under the PRESSURE, DISPLAY and WIND
keys to reveal the SET, + (plus), - (minus), ALARM and MIN/MAX operation
keys
Socket for
Adaptor
Socket for Thermo-
Hygro Sensor
PC COM Port
Battery
compartment
Advertisement
Table of Contents
