Table of Contents
Advertisement
4.
Packaged Contents
Before setting up, carefully unpack the contents onto a table or flat surface and
check that the following are complete:
Item:
Consisting of:
Fittings:
Base
• Main unit
• AD/DC 120V power
Station
Adaptor - optional use
(included)
Thermo-
• Main unit
• 32ft cable - optional
Hygro
• Rain protection
connection to the base
Sensor
station (included)
cover
• Wall mounting screws
• Plastic anchors for
screws
• Main unit with
• 2 x U-bolts for mast
Wind
Sensor
wind vane
holder
• 32ft cable
• 4 x Washers
(already
• 4 x Nuts
attached to the
• 1 x screw (to fix main
main unit)
unit to the mast holder
• Mast holder
Rain
• Main unit (base
Sensor
and funnel)
• 32ft cable
(already
attached to the
main unit)
Heavy
CD-Rom format
• 6.5ft PC cable for PC
weather
(English version
connection - optional
PC
only)
use (included)
software
5.
First, choose to use the adaptor (included in this set) or batteries for operation.
Both these methods allow for operation using wireless 433MHz transmission
or cable connection between the base station and the sensors and setting up
for both methods is as follows:
Illustration:
Base Station:
Operation
Keys
Note: flip open the front panel under the PRESSURE, DISPLAY and WIND
keys to reveal the SET, + (plus), - (minus), ALARM and MIN/MAX operation
keys
Setting up
Front Panel
Socket for
Ad ptor
a
Socket for Thermo-
Hygro Sensor
PC COM Port
Battery
compartment
Advertisement
Table of Contents
