Table of Contents
Advertisement
12.
Operation keys
The base station has 8 keys for easy operation. Please refer to the following
table for use and function of each key: Further descriptions of the key func-
tions with regard to their immediate range of application can be found in the
Programming modes:
SET - key
- In normal mode to enter the manual basic program-
ming mode
- In basic programming mode to select the following
setting modes:
- LCD contrast setting
- Manual time setting (hours/minutes)
- 12/24 time format display
- Calendar setting (year/month/date)
- Time zone setting
- °C/°F temperature setting
- Wind speed unit setting
- Rainfall unit setting
- Pressure unit setting
- Relative air pressure setting
- Weather picture threshold setting
- Storm warning setting
- Audible storm alarm setting
- In setting modes confirmation of the selected values
- In alarm modes alarm ON/OFF
- In alarm mode to enter programming of alarm values
(long pressing)
- To exit MIN/MAX modes
PRESSURE
- Toggle between Absolute and Relative air pressure
key
displays
DISPLAY key
- Toggle between the following current/ maximum/
minimum display modes:
- Indoor temperature and humidity
- Outdoor temperature and humidity
- Outdoor wind chill
- Outdoor dew point
- Rainfall (24h, 1h, total)
WIND key
To toggle between the following settings:
- Wind speed
- Wind direction
- Wind direction display in degrees
ALARM key
- In normal mode to enter the alarm programming mode
- In alarm programming mode to select the following
setting modes:
- Time alarm setting
- Indoor temperature alarm (high & low)
- Outdoor temperature alarm (high & low)
- Indoor humidity alarm (high & low)
- Outdoor humidity alarm (high & low)
- Outdoor wind chill alarm (high & low)
- Outdoor dew point alarm (high & low)
- Rainfall alarm (24h, 1h)
- Pressure alarm (high & low)
- Wind speed alarm (high & low)
- Wind direction alarm
- In setting modes confirmation of the selected values
- To exit MIN/MAX modes
- To reset general alarm symbol
MIN/MAX key
- In normal display mode to toggle between display of
MIN/MAX values
- To toggle between MIN/MAX values in MIN/MAX
mode
- To exit any programming mode
PLUS (+) key
- In normal display mode to toggle between format of
date display, seconds, time alarm and time zone
- To increase the values in the setting modes
- To exit MIN/MAX modes
- In normal display mode to re-enter data learning mode
(long pressing for 2 seconds)
MINUS (-) key
- In normal display mode to enable/disable the buzzer
alarm (long pressing)
- To decrease the values in the setting modes
- In basic programming mode audible storm alarm
ON/OFF
- To snooze the alarms off 24 hours when the alarm is
sounding
- In MIN/MAX modes to reset recorded values and
recorded dates and times
Advertisement
Table of Contents
