La Crosse Technology WS-8318U Instruction Manual page 14

WALL MOUNTING
1) Using a straight edge, horizontally space at 3-15/16 of an inch (100
2) Install three mounting screws (not included) into a wall —leaving
3) Place the atomic clock onto the screws, using the hanging holes on
Note:
Always ensure that the atomic clock locks onto the screws before
releasing.
POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
To achieve a true temperature reading, avoid mounting where direct sunlight can reach the
outdoor temperature transmitter. It is recommended to mount the outdoor temperature
transmitter on a North-facing wall or in any well-shaded area. The maximum transmitting
range is 330 feet obstacles such as walls, concrete, and large metal objects can reduce the
range.
Place both units in their desired location, and wait approximately 15 minutes before
permanently mounting to ensure that there is proper reception. The outdoor temperature
transmitter is not waterproof and should not be placed where it will be directly in the rain.
The outdoor temperature transmitter can be mounted in two ways:
•
with the use of screws, or
• using the adhesive tape.
MOUNTING WITH SCREWS
Mounting
Bracket
mm) three screw positions on a wall.
approximately 3/16 of an inch (5mm) extended from the wall.
the backside. Gently pull the atomic clock down to lock the screws
into place.
1) Remove the mounting bracket from the outdoor
temperature transmitter.
14