Deferred Spinup; Conducted Noise; Voltage Tolerance; Figure 1. Typical +5V Only Startup And Operation Current Profile - Seagate Momentus Thin 5400-RPM Product Manual

3.9.1.1 Typical current profile

Figure 1. Typical +5V only startup and operation current profile

3.9.2

Deferred spinup

Momentus Thin drives do not support the deferred spinup option. If you require this option, refer to the Momen-
tus 5400.3 SATA Blade Server family of drives.
3.9.3

Conducted noise

Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on
the +5 volt line.
Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave
injected noise at up to 30 MHz.
Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write
Note.
current.
3.9.4

Voltage tolerance

Voltage tolerance (including noise):
5V ± 10%
Momentus Thin Product Manual, Rev. E 9