Table of Contents
Advertisement
Other Phone Features (6757i CT RP Base Unit)
Adjusting the Volume
Pressing the volume button
speaker, and ringer volume.
• To adjust the ringer volume, leave the handset in the cradle and press
the volume button
settings for the ringer including Off — the display will temporarily
indicate the current ringer volume setting.
• To adjust the handset volume, lift the handset and press the volume but-
ton
this volume until it is adjusted again.
• To adjust the headset volume, press the volume button
the headset is activated (activate the headset by pressing
headset audio mode is set). The headset will remain at this volume until
it is adjusted again.
• To adjust the speaker volume, press the volume button
the speaker is activated (activate the speaker by pressing
handsfree speakerphone audio mode is set). The speaker will remain at
this volume until it is adjusted again.
Status Lights (LEDs)
The speaker LED, beside the
Indicator (MWI) LED, on the top right of your phone, provide visual
indications of your phone's status.
Speaker LED
Speaker LED Status
ON solid
Slow Flash
Rapid Flash
Message Waiting Indicator (MWI)
MWI LED Status
Slow Flash
Rapid Flash
Even Flash
Call Timer
• When you make or answer a call, the Timer shows the elapsed time of
the call.
while there is no active call. There are 10
while the handset is off hook. The handset will remain at
Description
Indicates a call is on Handsfree (speakerphone)
Indicates you are using the headset.
Indicates the call is muted. Press
call off mute.
Description
Indicates you have a message(s).
Indicates you have an incoming call.
Indicates one or more calls are on hold.
Model 6757i CT RP Phone Installation Guide 29
adjusts the receiver, headset,
key, and the Message Waiting
while
; ensure
while
; ensure
to take the
Mute
Mute
Advertisement
Table of Contents
