Test Print Troubleshooting; Hex Dump Mode - SATO /s8408 Operator's Manual

TEST PRINT TROUBLESHOOTING

Chapter provides instruction on special printing to identify and resolve specific print problems.
HEX DUMP
TEST LABEL

HEX DUMP MODE

The contents of the print buffer can be examined using the Hex Dump Mode. In the left column, each line of data
received is numbered. The center column provides the data in hexadecimal format. And in the right column, same
data is provided in the ASC ll format. Follow the flow chart provided below to perform this activity.
Cancels
print job
CF Card
Mode
Service
Mode
S8400 Series Operator Manual
Unit 5: Troubleshooting
Allows the operator to determine if there were problems in the
downloading of data.
Allows the operator to identify specific problems regarding mechanical
performance and setup.
POWER
ONLINE
QTY: 000000
LINE
OFFLINE
QTY: 000000
ENTER
LINE
5 sec.
CANCEL
ONLINE MODE
User
Mode
SEMBL MODE
ADVANCED MODE
Figure 5-1, Hex Dump Mode
HEX DUMP MODE
Interface
Mode
ENTER
PASSWORD
0000
SELECT DUMP DATA
RECEIVE DATA
RECEIVE BUFFER
INTERNAL DATA
SEND BACK DATA
Internal Data Receive Data Receive Buffer
ENTER ENTER
HEX DUMP
NORMAL HALF
For For
Internal Data Receive Data
LINE
ONLINE
Hex
Dump is
printed
5-11
Service
Mode
Displayed
if password
feature is
enabled
Send Back Data
ENTER ENTER
PN: 9001160 (C)