Manual Tuning; Presetting Stations - Sangean DT-210 User Manual

Manual tuning

1. Switch on the radio by pressing the Power
button.
2. Select the required waveband and connect
the supplied earphones or wire antenna for
FM and TV band (DT-210V) listening.
On AM(MW) or LW band (DT-210L),
rotate the radio for best reception.
3. A single press on either the Tuning Up/
Down will change the frequency up or
down. Adjust the volume control to the
required level.

Presetting stations

You may store up to 15 stations on FM band
and 10 stations on AM (MW) band for DT-210
(10 stations each on AM/FM/TV band for
DT-210V and 10 stations each on AM(MW)/
FM/LW band for DT-210L) .
1. Tune into the required stations using one
of the tuning methods previously
described.
2. To store the station, press MEMO button,
display will flash M and the suggested
memory location. Press MEMO button
again to finalize the station presetting.
During the M and suggested memory
location are flashing, you may use either
Tuning Up or Down to change the memory
location to edit your memory program then
press MEMO button again to finalize the
presetting.
5