Rear Panel Layout - Samson D-150 Owner's Manual

19 EQ – When selected, the unit is ready to display
the equalization curve from any connected
Samson Digital EQ.
20 PHASE– When pressed in, the LED switch lights
indicating the operating mode is set to Phase
meter.
21 VU – When engaged, the LED switch lights indi-
cating the operating mode is set to VU meter dis-
playing both PEAK and Average levels.
22 GEN (GENERATE) – Press this button and the LED
will light indicating the Generator mode is select-
ed, making the Pink Noise and Sine wave genera-
tors ready for operation.

Rear Panel Layout

�
�
POWER SWITCH – When set to the ON position, the
A
D1500 is powered up and ready for operation.
B MIDI IN DIN connector – The D1500 receives standard, or
system exclusive, MIDI data here.
C MIDI OUT DIN connector - The D1500 transmits standard,
or system exclusive, MIDI data here.
D MIDI THRU DIN connector - The D1500 passes standard,
or system exclusive, MIDI data here.
E I/O Accessory Blank Panel – Removable blanking panel
accesses option bay for adding additional Analog-to
Digital or Digital Input/Output boards.
F AC input fuseholder - Connect the supplied heavy
gauge 3-pin "IEC" power cable here.
G D-NET Accessory Blank Panel – removable blanking
panel accesses option bay for adding the DNET interface
card for controlling multiple D class units.
23 GLOBAL – When engaged, the red LED will illumi-
24 MIDI switch - This switch is used to page through
25 LOAD switch – Used to load one of the 100 pro-
26 STORE switch - Used to store up to 99 programs
27 Main Level Meter - Twelve segment LED meter
� � �
�
H ANALYZER MIC INPUT - Balanced XLR microphone
I
J
K K K
L
5
Controls and Functions
nate indicating that the unit is in GLOBAL mode,
and that the operating system parameters are
under control and displayed in the LCD window.
the MIDI parameters. When selected, the red LED
will illuminate and the MIDI parameters will be dis-
played in the LCD window.
grams from the internal memory.
into the internal memory.
displays the input level.
� � �
input with phanom power.
CH1 Balanced XLR jack input - Electronically bal-
anced XLR jack input.
CH2 Balanced XLR jack input - Electronically bal-
anced XLR jack input.
CH1 Balanced XLR jack output CH1 Balanced XLR jack output
balanced XLR jack output.
CH2 Balanced XLR jack output- Electronically bal-
anced XLR jack output.
�
� �
- Electronically