Specifications - Samson D-150 Owner's Manual

Inputs
Type
Connector
Impedance
Max. input level
AIO1:
AIO2:
Outputs
Type
Connector
Impedance
Max. output level
AIO1:
AIO2:
Frequency Response
Signal-to-noise-ratio
AIO1:
AIO2:
THD
Measurement Microphone Input
Type
Input impedance
Max. input level (MIC)
Phantom power
Digital Processing
Converter
Sample rate
AIO1 & AIO2
DIO1
Type
Frequency range
Detectors
Noise generator
Display
Type
Memory
Presets
Midi interface
Type
Power Supply
Mains voltage
Power consumption
Fuse
Mains connector
Dimensions
Weight
All specifications are subject to change without notice. All All specifications are subject to change without notice.
25

Specifications

electronically balanced
XLR
22 kΩ at 1 kHz
+22
+14dBu
+20dBu
electronically balanced
XLR
100 Ohms at 1 kHz
,
+14dBu
+20dBu
10 Hz to 35 kHz (-1dB)
@ 96 kHz sampling rate
Noise floor (unweighted) < -92 dBFS (-78 dBU)
Noise floor (A-weighted) < -100 dBFS (-86 dBU)
Noise floor (unweighted) < -106 dBFS (-86 dBU)
Noise floor (A-weighted) < -112 dBFS (-92 dBU)
0.007 % typ. @ +4 dBu, 1 kHz,
unity gain
electronically balanced
2 kΩ
variable from 0 dB to +60 dB
+24 V
24-bit Delta-Sigma,
64/128-oversampling
32, 44.1, 48, 64, 88.2, 96 kHz
96 kHz
digital 31-band FFT analyzer
20 Hz to 20 kHz, 31 bands on ISO standard frequencies
Peak and RMS
White Noise, Pink Noise, Frequncy Tunable Sine Wave
32 Largesize 13-segment LED Frequency band, plus LCD for
parameter control
100 memory locations, 99 user programable
5-pin. DIN jacks In/Out/Thru
115 V, 60 Hz, 230 V, 50 Hz
20 W typ.
T 630mA for 100- 120 Volt / T315mA for 220 - 240 Volt
Standard IEC receptacle
19 in. (w) x 10.5 (d) x 3.5 (h)
482 mm (w) x 267 (d) x 89 (h)
5.1 lb.(2.31 kg)