Advertisement
Available languages
Available languages
Quick Links
®
ITEM NO. 4070177
ROUTER TEMPLATE
GUIDE BUSHING KIT
For Use On Ryobi Routers R160, R165, R175,
R180, R181D, R181FB, R181PF, R1801M,
RE170, RE175, RE1802M, RE185 and RE600.
Sizes: 5/16 in., 7/16 in. (Short), 7/16 in. (Long),
1/2 in., and 5/8 in.
ROUTING WITH GUIDE BUSHING
You can accurately duplicate curves and complex
shapes by fitting your router with a template guide
bushing that extends below the subbase. The
router bit passes through the guide bushing. The
guide bushing then rides against a template.
TO INSTALL TEMPLATE GUIDE
BUSHING.
See Figures 1 and 2.
• Unplug your router.
WARNING:
Failure to unplug your router
could result in accidental starting causing
serious injury.
• Place router upside down on workbench.
• Place template guide bushing in recessed
portion of router base as shown in figure 1.
• Align the cutouts in guide bushing with threaded
holes in base.
• Secure guide bushing to router base with
screws provided.
• Tighten screws securely.
WARNING
: Failure to tighten screws could
cause bit to come in contact with bushing
resulting in serious injury.
Secure template to the workpiece. Set router to
desired depth of cut and turn it on. Place router
base on the template with the collar of the guide
bushing against the edge of the template. Lower
cutter into the workpiece and proceed around
template, keeping guide bushing pressed against
template edge. When routing with template
guide bushings it is necessary to allow for size
differences between the cutting edge of the cutter
and the face of the guide bushing collar. When
making templates, always allow for this size
difference. See Figure 2.
ROUTER BIT
COLLAR
SCREW
ALIGN
CUTOUTS
WITH
HOLES IN
BASE
HOLES
IN BASE
ROUTER BASE
TEMPLATE
GUIDE
SUBBASE
WORKPIECE
SIZE DIFFERENCE
RYOBI AMERICA CORP.
1428 Pearman Dairy Rd Anderson, SC 29625
Post Office Box 1207
Telephone 1-800-525-2579
RYOBI CANADA INC.
P.O. Box 910
Cambridge, Ontario N1R 6K2
Telephone 1-800-265-6778
TEMPLATE GUIDE
BUSHING
SCREW
RECESS IN
BASE
SUBBASE
Fig. 1
TEMPLATE GUIDE
BUSHING COLLAR
ROUTER BIT
Fig. 2
Anderson, SC 29622
Advertisement
Related Manuals for Ryobi 4070177
Summary of Contents for Ryobi 4070177
- Page 1 When ROUTER TEMPLATE making templates, always allow for this size GUIDE BUSHING KIT difference. See Figure 2. For Use On Ryobi Routers R160, R165, R175, R180, R181D, R181FB, R181PF, R1801M, TEMPLATE GUIDE ROUTER BIT BUSHING RE170, RE175, RE1802M, RE185 and RE600.
- Page 2 GUIDAGE DE GABARIT DE TOUPIE la fabrication de gabarits, tenez toujours compte de cette différence. Voir figure 2. R160, R165, S’utilise sur les toupies Ryobi modéles R175, R180, R181D, R181FB, R181PF, R1801M, COLLIER RE170, RE175, RE1802M, RE185 y RE600. BAGUE DE GUIDAGE...
- Page 3 DE TUPI Cuando haga plantillas, siempre tome en cuenta esta diferencia. Ver Figura 2. R160, R165, Para usar en los Modelos Ryobi R175, R180, R181D, R181FB, R181PF, R1801M, CUELLO BROCA DEL TUPI RE170, RE175, RE1802M, RE185 y RE600.
- Page 4 JUEGO DE BUJE DE GUIA DE PLANTILLA DE TUPI ROUTER TEMPLATE GUIDE BUSHING KIT - 4070177 - 4070177 Special Instructions for use with router model Instrucciones especiales para uso con los Nos. R160, R165, RE170, R180, R181D, R181FB, tupísModelosR160,R165,RE170,R180,R181D, R181PF, R1801M, RE1802M and RE185.