Installing a Runco
WindowWall
This section explains how to install a Runco WindowWall. We suggest that you read
the entire section before you attempt to install the wall.
Before You Begin
Make sure you have all the items in these lists before you begin unpacking and
installing your Runco WindowWall(s).
Tools/Equipment List
Depending on your installation, you may need one or more of the following items:
Other Things You May Need
• Drill and bits
• Nut drivers
• Pencil
• 3mm hex key
• M6 (#1/4-20) wrench
• String/string level
• Digital/laser level
• Ladders/lift
• Back brace
• Stud finder (if hanging LCD tiles on a wall)
• Quad Input Manager Module address adjustment tool
• LCD screen cleaner or LCD wipes - available at most electronics stores
•
two capable people to lift LCD tiles into place
At least
Runco WindowWall Installation Guide
15