Operation; Assembly - Ryobi RY29550 Operator's Manual

ATTAcHINg THE SHOULDER STRAP
See Figure 6.
Follow these steps to attach the shoulder strap.
Connect the latch on the strap to the hanger bracket.

Adjust the strap to a comfortable position.

WARNINg:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNINg:
Always wear safety goggles or safety glasses with side
shields when operating power tools. Failure to do so
could result in objects being thrown into your eyes result-
ing in possible serious injury.
WARNINg:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.

ASSEMBLY

LATcH
STRAp

OPERATION

FUELINg AND REFUELINg THE TRIMMER
FUEL MIXTURE
This product is powered by a -cycle engine and requires
pre-mixing gasoline and -cycle lubricant. Pre-mix unleaded
gasoline and -cycle engine lubricant in a clean 1 gallon
container approved for gasoline.
Recommended fuel: This engine is certified to operate on
unleaded gasoline intended for automotive use.
Mix a high quality -cycle engine lubricant at .6 oz. per
gallon (US).
Do not use automotive lubricant or -cycle outboard
lubricant.
DO NOT mix quantities larger than usable in a 30 day
period.
HIgH QUALITY 2-cYcLE ENgINE LUBRIcANT
10 — English
HAnGER
bRAckET
gASOLINE
1 gallon (US)
1 liter
Fig. 6
LUBRIcANT
.6 oz.
0 cc (0 ml)