Roland V-Accordion FR-1x Owner's Manual page 19

5.
Close the security clip to ensure that the
strap cannot come loose.
6.
Repeat steps (3)~(5) for the other strap.
The upper strap ends should look as follows:
7.
Slide the lower end of one strap through the
right holder ring as shown.
8.
Slide the strap end through the upper eyelet
of its plastic buckle (see the illustration).
9.
Turn the strap end around and insert it into
the lower eyelet, then pull it tight.
NOTE
You may want to adjust the length first to suit your prefer-
ence.
10.
Slide the plastic clip over the loose and long
lower strap ends to secure the strap.
11.
Repeat steps (7)~(9) for the other lower
strap end.
Bass strap
The FR-1x's bass strap (used to move the bellows in
and out) is made of fabric and fitted with a Velcro
strip that allows you to adjust its slack.
r
V-Accordion
Bass strap
19