Blind Stitch Hemming; How To Fold The Fabric; How To Sew; Changing The Needle Position - Janome Memory Craft 4400 Instruction Book

q
q
z
x
r
46
w
w
e
t
u

Blind Stitch Hemming

q
Stitch pattern:
w
Presser foot:

• How to fold the fabric

q
Wrong side of fabric
w
0.4 to 0.7 cm (1/8˝ to 3/8˝)
e
Overedge stitch

• How to sew

z
When the needle comes to the left hand side, position
the fabric so that the folded edge comes to the left side
of the guide. Lower the presser foot.
* Adjust the position of the needle swing with the stitch
width key so that the needle just pierces the folded
edge of the fabric when the needle comes to the left
side.
Sew guiding the folded edge along the guide.
x
Open the fabric after sewing.
* For a professional looking hem, try not to let the needle
piece more than 0.2 cm (1/8˝) into the fold.
If the folded edge is pierced too far to left side, you can
not expect a good seam on the right side of the fabric.

• Changing the needle position

When the zigzag width key is pressed, the pre-set needle
position is shown at 0.6.
* The indication at 0.6 is the needle drop position from
the presser foot guide.
* When you select the stitch pattern 16, the stitch width
will not change, but the needle drop position from the
foot guide will be changed.
r
The needle drop position is shifted to the right side
t
y
The needle drop position is shifted to the left side.
y
Guide
u
When the needle comes to the left side
i
When the needle comes to the right side
i
16 or 15
Blind hem foot G