Mm/Inch Option; Hoop Position Adjustment On/Off; (After Starting Embroidery) - Janome Sewing Machine Instruction Manual

18 mm
18 inch
19 OFF
19 ON

[18] mm/inch option

You can select "millimeter" or "inch" for
measuring unit displayed on the screen.
Press the right or left arrow button
select [mm] or [inch].
Press the ENTER button to register the new
setting or press the upward arrow button
go to the next setting.

[19] Hoop position adjustment ON/OFF

(after starting embroidery)

The hoop position can be adjusted before
sewing each layer (section) or even in the middle
of embroidering.
NOTES:
The adjusted hoop position will apply to the
subsequent layers (sections).
Turn off this function when sewing ordinary
embroidery designs.
Press the right or left arrow button
turn [ON] or [OFF] this function.
Press the ENTER button to register the new
setting.
If you wish to cancel the changes, press the
MODE button and LCD screen will return to the
My setting mode display without registering the
settings.
64
to
to
to