About Read And Write; Read; Write - Roland INTEGRA-7 Editor Owner's Manual

About READ and WRITE

READ

This updates all parameters within INTEGRA-7 Editor for iPad by reading in the
current parameter settings from the INTEGRA-7 sound module.
If you've edited parameters by operating the INTEGRA-7 itself (rather than
INTEGRA-7 Editor for iPad), differences will arise in the parameter settings of
the two systems; in this case, you must tap the
differences.
After connecting the INTEGRA-7 and INTEGRA-7 Editor for iPad, tap the
[READ] button to synchronize the two systems before you proceed.
[STUDIO SET] button, [TONE] button
Select what you wish to save.
Save-destination list
Select the save destination in the list.
The list shows the tone's type, bank, number,
name, and category.
[READ]
button to reconcile the

WRITE

This saves the Studio Set parameters or Tone parameters into the USER bank
of the INTEGRA-7 sound module.
The Studio Set parameters include all the editable parameters of the
MOTIONAL SURROUND, StudioSet Mixer, and Part View screens.
The Tone parameters are only those of SuperNATURAL Synth Tones.
When you tap the [WRITE] button, the following screen will appear.
1. Tap the [STUDIO SET] button or the
data that you want to save.
2. In the save-destination list, tap the desired save destination to select
it.
3. Tap the [EXECUTE] button.
10
[TONE] button to specify the
[WRITE] button
Accesses the Write screen.
[EXECUTE] button
Saves the data.