What The Lights Mean; Troubleshooting & Faq - Jabra BT3010 User Manual

* Functions marked with * are dependent on your phone supporting these
features. Check your phone's user manual for further information.

10. What the lights mean

What you see
Solid light:
Slow single flash:
Slow double flash:
Quick single flash:
Quick double flash:
Triple flash:
* BT3010 is equipped with Jabra Discreet Light feature, meaning that
light indicator (LED) turns off after 1 min of non-activity. Headset is still
active, and light will flash again after a tap on the answer/end button
or any call activity.
11. Troubleshooting & FAQ
I hear crackling noises
• For the best audio quality, always wear your headset on the same side
of the body as your mobile phone.
I cannot hear anything in my headset
• Increase the volume on the headset.
• Ensure that the headset is paired with the phone.
• Make sure that the phone is connected to the headset – if it does not
connect either from the phone's Bluetooth menu or by tapping the
answer/end button, follow the pairing procedure (refer to pairing
section in this user manual).
• You can determine whether your headset is connected to a device by
looking at the flashes on the headset after tapping the answer/end
button when the headset is on: single slow flashes means that the
headset is connected to a device, double slow flashes means that the
headset is currently not connected.
I have connection problems
• You may have deleted your headset pairing connection in your mobile
phone. Follow the pairing instructions; refer to this section in this user
manual.
• You can determine whether your headset is connected to a device by
looking at the flashes on the headset after tapping the answer/end
button when the headset is on: single slow flashes means that the
headset is connected to a device, double slow flashes means that the
headset is currently not connected.

What is the mean about your headset
In pairing mode – see Pairing section
Connected to phone and in standby mode*
Not connected to phone and in standby mode
Active on call
Incoming/Outgoing call
Battery low