Cleaning The Filter Bag - iRobot Verro 600 Owner's Manual

Cleaning the Filter Bag


Remove the filter bag assembly.
6
Turn the filter bag inside out and rinse away any accumulated debris
with a hose. Gently agitate and squeeze the bag while rinsing it until
the water is clear. If this does not remove all visible dirt, machine
wash the bag using cold water on the gentle cycle. Do not use
detergents, fabric softeners, bleach or other additives.
Do not machine dry.

Turn the filter bag so that the felt surface is on the inside and the
smooth, shiny surface is on the outside and place it back on the
support bars.

Replace filter bag assembly in the robot.

Replace the bottom cover. Make sure the tabs click into place.
(cont...)

Remove the filter bag from the
support bars.
Label
www.irobot.com
1