Using Verro - iRobot Verro 600 Owner's Manual

Using Verro

When Verro has finished cleaning the pool it will stop automatically and the Power Supply

light will go OFF.

Wait 20 minutes before removing Verro from the pool to allow the motors to cool.
Shut off and unplug the Power Supply every time you remove the cleaner from the water.
Always remember to turn the Power Supply OFF and unplug it from the power outlet
before removing the cleaner from the pool.
10
Unplug the Power Supply from the GFCI outlet.
Never leave the Power Supply plugged in when Verro is not in use.
Unplug the floating power cord from the Power Supply (turn the locking collar on the plug
11
counter-clockwise to unlock it).
1 Use the floating power cord to pull Verro to the edge of the pool, but use the handle to lift
Verro out of the water. Water will drain from Verro as it is lifted.
10
iRobot Verro Owner's Manual
(cont...)
Rotate counter-clockwise
and pull to unlock