iHome iHM62 Instruction Manual page 2

Extend the Speaker
Power Switch
On Position Off Position
Charging the iHM62
Power/Battery LED
Blue = power on/charged
Red = low battery OR
charging mode (when
connected to USB power source
Audio/Charge USB Connection
Power Switch
On Position
Mode
(LED Effects)
Button
colors: cycle, one color, none
Note: When not in use, turn speaker off
to save battery power
One to each
To powered
speaker
USB port
To audio
source
Off Position
mobile phone PSP iPod MP3/MP4
PC
Laptop
Connect To Audio Input Source
Using the iHM62
To unlock and expand each speaker, grip the top and bottom
and give a small twist counter-clockwise. DO NOT pull hard
once open, as the built in spring will automatically extend the
speaker to its proper position.
Press speaker down from the top and twist clockwise to lock in
place when not in use.
Connecting the iHM62
• Connect a mini-USB plug to the input jack on each speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack
or line-out of any audio device.
• Slide the Power Switch of each speaker to the ON
The blue power light will come on.
• Press play on your audio device and adjust its volume to
listen to audio.
Note: the larger USB plug is used for charging only, not
for audio. Please refer to next section for charging
instructions.
Charging the iHM62
The iHM62 is powered by a rechargeable battery in each
speaker. When the blue power light turns red, or if you start to
notice sound distortion at higher volumes, it's time to recharge
the battery.
• Connect the larger USB plug to a powered USB port, such as
that on a computer. The light on each speaker will stay red
while charging and turn blue when fully charged.
Note: you can continue to listen to the speaker and/or
enjoy lighting effects while it is charging
LED Lighting Effects:
- Press the LED lighting effects button
through 3 lighting effects modes: colors cycle, one color,
none.
Colors Cycle:
- LEDs will fade in and out in sequence: blue, green, amber,
red, repeat (color cycle is the default when the unit is
powered on).
One Color:
- Press during cycle mode to hold the last color shown
Note:LED will shine at full brightness.
None:
- Enjoy your music without lighting effects.
Note: speaker is still on, indicated by power LED.
position.
to cycle