Frequency Setting Example - Icom IC-A210E Instruction Manual

n Frequency setting example
The following example shows to how to set 126.40 MHz as the standby frequency and then exchange it with the active fre-
quency indicator.
STEP
q Rotate [O-DIAL] clockwise to
select "126" MHz.
w Rotate [DIAL] counterclockwise
to select "400" kHz.
e Push [�].
NOTE:
DO NOT hold down [�]
continuously. Otherwise the standby
frequency disappears.
happens, hold down [�] until the
standy frequency reappears.
RX
134.80
RX
134.80
RX
134.80
RX
126.40
If this
DISPLAY
121.80
Previously used frequencies appear.
5
Rotate the large tuning dial to change
the standby frequency in MHz steps.
126.80
5
Rotate the small tuning dial to change
the standby frequency in kHz steps.
126.40
5
The active frequency and the standby
134.80
frequenies are exchanged.
5
2
BASIC OPERATION
NOTE
02
7