Icom IC-T7H Instruction Manual page 23

D Memory (skip) scan
ALL CHANNEL SCAN
BAND SELECT SCAN
ALL CHANNEL SCAN: Repeatedly scans all programmed
memories, except for those set as skip channels.
BAND SELECT SCAN: Repeatedly scans all memories with
programmed frequencies in the 144 MHz band or 430(440)
MHz band, except for those set as skip channels.
ADVANCED FUNCTIONS
➀
Push [MR] to select memory mode.
➁
While pushing [ SCAN] rotate the tuning dial to
(BAND)
select the desired band.
➥ The following scan bands are selectable:
• "SEL ALL" for all channel scan.
• "SEL 144" for selected band scan of the 144 MHz band.
• "SEL 430" or "SEL 440" for selected band scan of the
430(440) MHz band, depending on version.
➥ After releasing [
(BAND)
➥ To activate the previously selected scan, dial rotation is
not necessary—just push [
➥ During scan, the following can be changed:
• Scan range using [
(BAND)
• Scan direction using [DIAL].
➂
To stop the scan, push [
(VFO)
SCAN], the selected scan starts.
SCAN] for 1 sec.
(BAND)
SCAN], with/without [DIAL].
CLR].
4
19