Husqvarna Automower solar hybrid Operator's Manual page 55

• Alarm (4-1-3)
This function means that the first number of the
PIN code must be specified within 10 seconds
after the STOP button has been pressed or the
mower has been lifted up for any reason. If the
correct number is not entered after three
attempts, the alarm sounds. The alarm can then
be stopped by entering the complete PIN code.
IMPORTANT INFORMATION
The alarm can be activated on the mower
using the Alarm function. It is recommended
that this function is used.
To:
• Activate: Move the cursor to Alarm and press
YES. Select ON to activate and press YES.
Then specify for how long the alarm should
sound, by answer the question Duration of
alarm?.
• Deactivate: Move the cursor to Alarm and press
YES. Select OFF to deactivate and press YES.
When you select OFF, the alarm function is also
deactivated.
• SMS (4-1-4)
The SMS feature allows the mower to
communicate with its operator. When the mower
for some reason requires assistance, it will send
an SMS message to your mobile phone.
To:
• Set the phone number: Move the cursor to
Phone number and press YES. Enter your
phone number including country code (e.g.
+46(0)123456789) and confirm with YES.
• Activate/deactivate the SMS sending feature
for fault messages or alarms: Move the cursor
to SMS at fault/alarm and press YES. Then
press YES to activate or NO to deactivate the
SMS sending.
• Activate/deactivate time-controlled sending of
SMS: Move the cursor to Periodical SMS and
press YES.
Press YES to activate time-controlled sending of
SMS, confirm with YES. Then define how often
the mower should send SMS messages about
its status by entering the interval in hours (e.g. 4
h for sending an SMS every 4 hours).
Press NO to deactivate the time-controlled
sending of SMS.
56 - English
6. MENU FUNCTIONS
PIN code
Time lock
Alarm
SMS
4-1-3
PIN code
Time lock
Alarm
SMS
4-1-4
_ _ _min
ON
OFF
Phone number
SMS at
fault/alarm
Periodical
SMS
SIM PIN
SMS test