Husqvarna Automower solar hybrid Operator's Manual page 52

Hide thumbs Also See for Automower solar hybrid:
Table of Contents

Advertisement

When the function is selected the mower will
immediately follow the boundary wire, guide 1 or
guide 2, depending on which one it finds first, in
to the charging station. If there is a passage and
the mower can not run through it, the Corridor
width value is set too high. When Test IN is
activated, the mower runs at the greatest
distance from the wire that the selected corridor
width permits.
The adjacent picture shows how Automower
negotiates a passage when a value of 8 is set for
the Corridor width, but not when a value of 10 is
set.
IMPORTANT INFORMATION
When Test IN (3-2-4) is used, the house icon
on the display will come on and the mower
will remain in the charging station. Press the
Home button to return to operations.
Test OUT (3-2-5)
The Test OUT (3-2-5) function is used to try
different charge exit settings and to find out how
far it is from the charging station to a remote
area.
To test the settings for Follow loop out (3-2-1):
• Set Proportion to 100 % for the most remote
area to be tested and 0 % for the other areas.
Place Automower
select Test OUT (3-2-5). The mower will now
leave the charging station directly according to
the stated direction and start mowing after the
stated distance. Reset the Proportion values
when testing is finished.
To find out the distance from the charging station
to a remote area:
• State a distance that easily exceeds the true
distance. The maximum distance that can be
stated is 500 metres. Set Proportion to 100 %
for the areas where the distance is to be
measured and 0 % for the other areas. Place
Automower
®
in the charging station and select
Test OUT (3-2-5). The mower will now leave the
charging station in keeping with the stated
direction. Stop the mower after the required
distance, open the solar cell panel and read off
the distance stated in metres on the mower's
display. Enter the number of metres shown in
Distance for the area in question. Reset the
Proportion values when testing is finished.
6. MENU FUNCTIONS
in the charging station and
®
®
Follow loop out
Follow loop in
Corridor width
Test IN
Test OUT
3-2-4
8
10
English - 53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents