Table of Contents
Advertisement
Introduction
Rockford engineers designed the Punch multi-channel amplifiers to with-
stand the rugged automotive environment while delivering superior sound
quality in a flexible, reliable, and efficient package. TRANS•ana is a low
voltage circuit in the preamp stage of all Punch multi-channel amplifiers
that lets the music sound crystal clear and very real, even when played at
high volume levels. This is matched with TOPAZ, a unique grounding cir-
cuit used to eliminate noise problems associated with car audio systems
and their installation. Flexibility is accomplished with the use of high-level
inputs and a built-in crossover. The use of a protection circuit called
NOMAD, along with MOSFET and DSM (Discrete Surface Mount) and our
innovative MEHSA heat dissipating technology improves amplifier efficien-
cy. The result of these components give the Punch amplifier awesome
sound quality in a "Bullet Proof" package.
Punch Amplifier Accessory Pack
The accessory pack shipped with the Punch multi-channel amplifiers
includes the mounting hardware necessary to secure the amp to the
vehicle.
Installation & Operation Manual
Punch Verification Certificate
(4) Amplifier mounting screws (#8 x 3/4" Phillips)
(4) Speaker/Power connector set screws (3/32" Allen)
(4) Endbell mounting screws (9/64" Allen)
(1) Allen wrench (3/32")
(1) Allen wrench (9/64")
(2) High Level Input harness (Punch 200/400/600/800, 4-channel)
- Replacement part #CC-1992 - 4 position molex
(1) High Level Input harness (Punch 600, 5-channel)
- Replacement part #CC-2347 - 8 pin mini-DIN
(1) Inline fuseholder (except Punch 800, 4-channel)
(1) ATC 30 amp fuse (Punch 200, 4-channel)
(1) ATC 50 amp fuse (Punch 400/600, 4-channel & Punch 600, 5-channel)
NOTE: Refer to the specifications section for recommended fuse size on
the Punch 800, 4-channel amplifier.
– 1 –
Hide quick links:
Advertisement
Table of Contents
