Setting The Date And Time - Ricoh R8 User Manual

Setting the Date and Time

When the power is turned on for the first time, the date/time
setting screen appears.
1
Press the ADJ./OK button
!"#$ to set the year,
month, date and time.
• Change the value with !" and
move the frame with #$.
2
In [Format], choose the date
and time format.
• Select the date and time format
with !".
3
Check the display and then
press the ADJ./OK button.
• The date is set.
Note ---------------------------------------------------------------------------------------------------
• If the battery is removed for more than one week, the date and time settings will be
lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining power
for more than two hours.
• The set date and time can be changed later. (GP.162)
• The date and time can be inserted into images. (GP.91)
2008 01
00 00
Y/M/D hh:mm
2008/01/01 00:00
Setting at shipping
2008 03
00 12
Y/M/D hh:mm
2008/03/01 00:12
01
01
31