Disconnecting Or Unpairing From A Bluetooth Device - HTC J Z321e User Manual

193 Bluetooth
5. When you see the name of your headset in the Available devices section, tap
the name.
6. HTC J automatically tries to pair with the headset.
7. If automatic pairing fails, enter the passcode supplied with your headset.
The pairing and connection status is displayed below the hands-free headset or car kit
name in the Bluetooth devices section. When the Bluetooth headset or car kit is
connected to HTC J, the Bluetooth connected icon
Reconnecting a headset or car kit
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC J,
and then turning on the headset. However, you might have to connect manually if
your headset has been used with another Bluetooth device.
Make sure that the headset is discoverable. Refer to the headset manual for details.
1. Slide the Notifications panel open, and then tap
2. If Bluetooth is off, tap the Bluetooth On/Off switch to turn it on.
3. Tap Bluetooth. The Bluetooth screen opens.
4. Tap the headset's name in the Paired devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car
kit documentation to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in
Unpairing from a Bluetooth device
Connecting a Bluetooth headset or car kit
Disconnecting or unpairing from a Bluetooth
device
Disconnecting a Bluetooth device
1. Slide the Notifications panel open, and then tap
2. Tap Bluetooth. The Bluetooth screen opens.
3. In the Paired devices section, tap the name of the device to disconnect.
4. Tap OK.
Tap the name of the device to reconnect it.
is displayed in the status bar.
on page 194, and then follow the steps under
on page 192.
.
.