HP Configuring Arrays Reference Manual page 38

Configuring a controller
Open ACU.
1.
For more information, see "Using the ACU GUI (on page 27)."
Select a controller from the Controller/Device menu.
2.
The Configuration screen appears.
Configure the controller:
3.
To configure manually, see "Performing a Configuration task (on page 38)."
o
To configure with a wizard, see "Using Wizards (on page 50)" or "Using Express Configuration (on
o
page 52)."
When prompted, save the configuration.
4.
Do one of the following:
5.
Configure an additional controller. Repeat steps 3 through 5.
o
Click Exit ACU.
o
Performing a Configuration task
Open ACU.
1.
For more information, see "Using the ACU GUI (on page 27)."
If ACU is already open, click the Configuration tab.
Select a device from the Controller/Device menu.
2.
HP Array Configuration Utility 38