Set Rdfnet; Set Receiver; Set Trigger; Set Volume - HP NonStop RDF J-series RVUs Management Manual

SET RDFNET

The SET RDFNET command sets the designated configuration parameters for the RDFNET
process to the supplied values within the RDF configuration memory table. The supplied values
are not applied to the RDF configuration file, however, until you issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SET RDFNET netsync-option
where netsync-option is:
{CPUS primary-CPU : backup-CPU}
{PRIORITY priority-number
{PROCESS

SET RECEIVER

The SET RECEIVER command sets the designated configuration parameters for the receiver
process to the supplied values within the RDF configuration memory table. The supplied values
are not applied to the RDF configuration file, however, until you issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SET RECEIVER receiver-option
where receiver-option is:
{ATINDEX atindex
{CPUS primary-CPU : backup-CPU
{EXTENTS (primary-extent-size,secondary-extent-size)}
{PRIORITY priority-number
{PROCESS
{RDFVOLUME volume
{FASTUPDATEMODE on-off value

SET TRIGGER

The SET TRIGGER command sets trigger parameters within the RDF configuration memory
table. The supplied values are not applied to the RDF configuration file, however, until you issue
an ADD TRIGGER command. The trigger type (REVERSE or TAKEOVER) is specified in the
ADD TRIGGER command.
Where Issued: Primary system; backup system when the primary is not available.
Security: Super-user group member.
SET TRIGGER trigger-option
where trigger-option is:
{PROGRAM
{INFILE
{OUTFILE
{CPUS
{PRIORITY priority
{WAIT | NOWAIT

SET VOLUME

The SET VOLUME command sets the designated configuration parameters for an updater process
to the supplied values within the RDF configuration memory table. The supplied values are not
applied to the RDF configuration file, however, until you issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SET VOLUME volume-option
354 RDF Commands Quick Reference
process-name
process-name
program-file
infile
outfile
primary-CPU : backup-CPU
}
}
}
}
}
}
}
}
}
}
}
}
}
}