Spark Arrester Service (Optional Equipment) - Honda WDP20X Owner's Manual

SERVICING YOUR PUMP

SPARK ARRESTER SERVICE (optional equipment)

The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
1. Allow the engine to cool, then remove the two 8 mm nuts and
remove the muffler from the cylinder head.
2. Remove the four 5 mm screws from the muffler protector and
remove the muffler protector.
3. Remove the 4 mm screw from the spark arrester and remove the
spark arrester from the muffler.
MUFFLER
PROTECTOR
NUTS, 8 mm (2)
MUFFLER MUFFLER
4. Use a soft brush to remove
carbon deposits from the spark
arrester screen. Be careful not
to damage the spark arrester
screen.
5. Inspect the spark arrester for
breaks and holes. Replace it if
necessary.
6. Install the spark arrester and
the muffler in the reverse order
of disassembly.
34
SCREW, 5 mm (4)
SCREW, 4 mm
SPARK
ARRESTER
SPARK ARRESTER SCREEN