Spark Arrester Service (Optional Equipment) - Honda WB20X Owner's Manual

Hide thumbs Also See for WB20X:
Table of Contents

Advertisement

SERVICING YOUR PUMP
SPARK ARRESTER SERVICE (optional equipment)
Your engine is not factory-equipped with a spark arrester. In some
areas, it is illegal to operate an engine without a spark arrester. Check
local laws and regulations.
A spark arrester is available
from
authorized Honda servicing dealers.
The spark arrester
must be serviced every
100 hours to
keep it
functioning as designed.
If the engine has been running, the muffler will be very hot. Allow the
muffler to cool before servicing the spark arrester.
1. Remove the two 8 m m nuts, and remove the muffler.
2. Remove the four 5 m m self-tapping screws, and remove the muffler
protector from the muffler.
3.
Remove the 4 mm screw from the spark arrester, and remove the
spark arrester from the muffler.
5
mm SELF-TAPPING
MUFFLER PROTECTOR
4 mm
SCREW
SPARK ARRESTER
4. Use a brush to remove carbo
deposits from the spark arrester
screen. Be careful to avoid
damaging the screen.
The spark arrester must be free
of breaks and holes.
Replace
the spark arrester if
it i s
damaged.
SPARK ARRESTER SCREEN
5. Install the spark
arrester, muffler protector, and muffler in the
reverse order of disassembly.
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wb30x

Table of Contents