Outboard Motor Attachment; Motor Angle For Cruising - Honda Automobiles BF2D Owner's Manual

OUTBOARD MOTOR AlTACHMENT
Attach the stern bracket to the tran-
som and tighten the clamp screws.
Before operating the boat, check
the tightness of the clamp screws.
Tie a rope through the hole in the
stern bracket andsecure the other
end of the rope to the boat. This
willprevent accidentalloss of the
motor.
STERN BRACKET
SAFETY ROPE
MOTOR ANGLE FOR CRUISING
Adjust the motor so the propeller shaft is parallel with the water surface.
INCORRECT
CORRECT
CAUSES BOAT TO "SQUAT"
GIVES MAXIMUM PERFORMANCE
INCORRECT
CAUSES BOAT TO "PLOW"
20