Engine Oil Change - Honda Marine BF8D Owner's Manual

Engine Oil Change

An engine oil evacuation/filling
device may be used to remove/add
the engine oil.
Drain the used oil while the engine is
warm. Warm oil drains quickly and
completely.
1. Unlatch and remove the engine
cover (p. 56 ).
SERVICING YOUR OUTBOARD MOTOR
ENGINE OIL DRAIN SCREW
2. Remove the oil filler cap, and
remove the engine oil drain screw.
3. Allow the used oil to drain
completely, then reinstall the
engine oil drain screw, and tighten
it securely.
Improper disposal of engine oil
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin or
dump it on the ground.
4. With the outboard motor in a
vertical position, fill to the upper
limit mark on the dipstick (p.
with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
1.1 US qt (1.0 , 0.9 Imp qt)
With oil filter change:
1.4 US qt (1.3 , 1.1 Imp qt)
5. Install the oil filler cap and tighten
it securely.
6. Install and lock the engine cover.
56 )
57