Honda Marine BF135A Owner's Manual page 99

FUSE PULLER
BLOWN FUSE
TAKING CARE OF UNEXPECTED PROBLEMS
4. Use the fuse puller from the fuse
holder to remove the fuses. If a
fuse is blown, install a replacement
fuse of the same specified rating.
The outboard motor is supplied
with spare fuses in the junction
box lid.
MAIN FUSE RATINGS:
10 A, 15 A, 30 A
5. Reinstall the junction box lid, and
the engine cover.
6. Reconnect the battery.
Never use a f use with a rating
greater than specif ied. Serious
damage to the electrical system could
result.
If a blown fuse is found, try to
determine and correct the electrical
problem that caused the blown fuse.
An uncorrected electrical problem
may cause the fuse to blow again.
If fuses continue to blow, take the
outboard motor to an authorized
Honda Marine dealer for inspection
and service, or refer to the shop
manual.
97