CONTROLS
& FEATURES
Transom Angle Adjusting Bolt
The transom angle adjusting bolt is
used to adjust the angle of the out-
board motor in the normal operating
position (see page 19).
Loosen the wing nut to free the
adjusting bolt.
Adjust the angle of the outboard
motor, and tighten the wing nut. Be
sure that the bolt head and wing nut
are seated in one of the four re-
cesses in the adjustment slot.
Fuel Cap Vent Knob
The cap is provided with a vent
knob to seal the fuel tank. Open the
vent knob 2 or 3 turns before oper-
ating the outboard motor (see page
23).
ADJUSTING BOLT AND WING NUT
VENT KNOB
FUEL FILLER CAP
15