U.S. EX-L
V6, and
Canadian EX-L
EX-L V6 with navigation system
Your vehicle has a memory feature
for the driver's seat position.
Two seat positions can be stored in
separate memories. You select a
memorized position by pushing the
appropriate button or using the
appropriate remote transmitter
(Driver 1 or Driver 2).
and
Storing a Driving Position in
Memory
Store a driver's seat position only
when the vehicle is parked.
1.
Turn the ignition switch to the ON
(II) position. You cannot add a
new seat position in memory
unless the ignition switch is in the
ON (II) position. You can recall a
memorized position with the
ignition switch in any position.
2.
Adjust the seat to a comfortable
position (see page
2011 Accord Sedan
Driving Position Memory System
SET BUTTON
3.
Press and release the SET button.
92
).
You will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current position of the driver's
seat is now stored.
MEMORY BUTTONS
CONTINUED
101