Honda Accord Sedan Owner's Manual page 412

Checking and Replacing Fuses
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
, and , or the diagram on
412 413 414
the fuse box lid or the fuse label,
which fuse or fuses control that
component. Check those fuses first,
but check all the fuses before
deciding that a blown fuse is not the
cause. Replace any blown fuses and
check if the device works.
1. Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2. On the under-hood and passenger's
side interior fuse boxes, remove
the cover from each fuse box.
FUSE
BLOWN
3. Check each of the large fuses in
the under-hood fuse box by
looking at the wire inside.
Removing these fuses requires a
Phillips-head screwdriver.
2011 Accord Sedan
BLOWN
Also check the combined fuse box in
the under-hood fuse box.
Fuses
CONTINUED
409