Operating Pressures - Heat Controller HTV Series Installation, Operation & Maintenance Instructions Manual

UNIT OPERATING CONDITIONS
NOTE: Table 9 includes the following notes:
•
Air ow is at nominal (rated) conditions;
• Entering air is based upon 70°F DB in
heating and 80/67° in cooling;
•
Subcooling is based upon head
pressure at compressor service port;
Table 9: HTV/HTD/HTH Typical Unit Operating Pressures and Temperatures (60 Hz)
Table 9: HTV/HTD Series Typical Unit Operating Pressures and Temperatures (60Hz)
HTV/HTD/HTH SERIES
•
HTV/HTD/HTH units have TXV expansion device; HTV/HTD units have TXV expansion device;
•
Cooling air and water values can vary
greatly with changes in humidity level.
38
41
Heat Controller, Inc.