Advertisement
DRIVE SELECT
MID
BASS
I
J
K
I. MID - Adjusts the overall tone quality of the
DRIVE channel . High Mid settings will empha-
size mid frequencies. A lower setting will notch
the midrange to produce the "crunch" sound
characteristic in most heavy metal music.
J. BASS - Adjusts the amount of low frequency
boost or cut in the Drive channel. This control is post
distortion and is useful for adjusting the amount of
"thump" or "chunk" produced by the drive channel.
K. DRIVE SELECT - When this button is pressed,
the amp switches from the Normal channel to the
Drive channel.
L. VOLUME - Adjusts the overall volume of the drive
channel .
VOLUME
REVERB
L
M
700
Roc•Pro
FOOTSWITCH
N
M. REVERB - Adjusts the amount of reverb present
in both the Drive and Normal Channels.
N. FOOTSWITCH (INCLUDED) - Plug-in connec-
tion for the remote footswitch to select between the
normal and drive channels and to turn the reverb
effect on and off. Using the footswitch overrides the
front panel select buttons. NOTE: Any good quality
patch cord will work with the remote footswitch,
however, a speaker grade cord is preferable to a
coax guitar cord.
O. POWER INDICATOR - This LED is illuminated
when the power is ON.
P. POWER SWITCH - Turns the AC power ON
and OFF.
7
TM
power
O
P
Advertisement
