Register; Clock Setup; Backlight; Upnp - Grace Digital VICTORIA GDI-IRN1941 User Manual

Please note that your radio's serial number will still be registered with your Grace Digital internet radio
account (assuming you already registered the radio). Any premium station passwords, my stuff stations
and podcast that were saved on our web site will be saved all re-associate with your radio after you
power back on, log onto your network and download a new stations list.
<Register>
This will display a key that can be used to register the radio on the Grace Digital Audio Customer portal:
www.grace.reciva.com
<Clock Setup>
Use this option to set the time, to set an alarm and to view the current alarm setting, see "Setting the
alarm".
<Backlight>
Selecting this option will alter the Internet radio's backlight brightness.
1. After selecting the 'Backlight' menu item, the radio will display its list of three menu modes: 'Inactive',
'Active' and 'Standby'. These three states are explained below:
• The radio gets into its 'inactive' state when there is no button pressed for 30 seconds.
• The 'active' state is when there is user activity.
• 'Standby' is the state when the radio has been turned off.
2. Rotate the knob to highlight the desired menu mode and press SELECT.
1. The radio will now display the current backlight value for this menu mode. You can alter this value
by rotating the knob to increase or decrease it.
<UPnP> Customize your radio's name on the network
This menu allows you to change the name of your device. You can name your device any name you
want so other UPnP devices will be able to view the name. Such as Greg's Kitchen Radio etc.
29