Changing The Volume; Storing A Radio Station In A Preset; Playing A Preset Radio Station; Requesting A Station That Is Currently Unavailable - Grace Digital VICTORIA GDI-IRN1941 User Manual

18

Changing the volume

When a radio station is playing increase the volume by turning the Power /Vol knob clock wise.

Storing a radio station in a preset

Preset on Radio
When a station is playing, press the 'preset' button then turn the Push/Sel knob until the preset you want
to set is highlighted (12 stations can be saved on the radio's presets). After it is highlighted press and
hold in the 'Push/Sel' dial until the screen shows:
Assigned to
Preset #
* Where "#" is the number of the preset button you are saving
Preset on Remote Control
1. When a station is playing, press and hold one of the numbers (1-10) on the remote control.
2. Select a number to assign the station to (1-10).
* Please note presets 1-5 are the same for the remote & radio and can be stored using either the radio
or remote.

Playing a preset radio station

When your radio is powered on and connected to your Wi-Fi network, press the preset button on the
radio then turn the 'Push/Sel' dial until the preset you want to play is highlighted (1-12) on the radio, or
1-10 on the remote control, for the station you want to listen to.
* Note, do not hold the button down - if you do then the station currently playing will overwrite the one
stored in the preset; *be careful*.

Requesting a station that is currently unavailable

If you want to listen to a particular radio station which is currently not available online, you can visit the
Grace Digital Audio web site at www.grace.reciva.com and enter in a request to add the station to the
list.