Choice Of Amplifier Location And Cooling; Line Voltage Adjustment - Goldmund SR2.3 User Manual

1 - UNPACKING
You will find in the GOLDMUND SR2 box :
- The amplifier.
- The power cord.
- This manual and the warranty card.
- Accessories and spare fuses.
Please keep the packaging in case you need to transport the amplifier at a later date or if you have to
send it for maintenance.

2 - CHOICE OF AMPLIFIER LOCATION AND COOLING

The GOLDMUND SR2.3 amplifier, as all the high quality amplifiers may generate a large amount of
heat if driven into high power.
It is mandatory to allow a proper cooling of the heat sink. Avoid any location which is not properly
ventilated and avoid putting other equipment on top of the amplifier.

3 - LINE VOLTAGE ADJUSTMENT

An AC line voltage selection is possible inside the chassis. Please ask your dealer for assistance if the
line voltage provided is not appropriate.
ATTENTION : On the 220V position, the GOLDMUND SR2.3 amplifier will function properly for AC
voltages in between 200V and 245V. On the 110V position, the AC line must deliver between 95V and
125V. If your AC line is usually out of these tolerances, please consult your GOLDMUND dealer.
Please check the value of the mains line fuse. This fuse is located in the power cord receptacle. The
lid can be removed with a small screwdriver when the cord is removed.
Use a 5A slow-blow fuse for 220V and a 8A slow-blow fuse for 110V.
3