Download Print this page

Important Notice - Goldmund GOLDCUBE Manual

Advertisement

You must use a 5 Amps fast f use (or 6.3 Amps if you use very low
efficiency speakers) or 8 Amps ultra-fast.
Then put the cover back in position and switch the power on if
the short-circuit has been detected and removed.
To avoid the f uses to blow, avoid to short-circuit the outDut
terminals accidentally.
There is no risk to leave the soeaker terminals unconnected
when the amo is on,
8 .
M A I NT E N A NCE
The GOLDMUND GOLD CUBE is gold plated with a 1O microns
18kt gold layer, using the best ieweler technology. lt should
never alter externally, except if mishandled.
To clean the amplifier, use a very soft cloth to avoid scratching
the gold surface.
Otherwise the GOLDMUND GOLD CUBE amplifier requires no
maintenance. For the audio purist who wants to keep his amp
sounding as new. we only recommend that after a year or two,
you have a technician or an official GOLDMUND representative
readjustthe DC offset. Thisvery simple operation takes onlytwo
minutes and will give you the safety of long years of unmatched
sound quality.
IMPORTANT NOTICE :
The Goldcube should never be left powered on, without input
cable connection to a preamplifier. lf warmed up without con-
nection. please insert short-circuit plugs delivered with the cube
to avoid any RF oscillation.
- 5 -

Advertisement

loading