Gigabyte GA-MA74GM-S2H User Manual page 38

Am2+/am2 socket motherboard for amd phenom fx processor/amd phenom x4 processor/ amd phenom x3 processor/amd athlon x2 processor/ amd athlon processor/amd sempron x2 processor/ amd sempron processor
Hide thumbs Also See for GA-MA74GM-S2H:
Table of Contents

Advertisement

HDD S.M.A.R.T. Capability
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your
hard drive. This feature allows your system to report read/write errors of the hard drive and to
issue warnings when a third party hardware monitor utility is installed. (Default: Disabled)
Away Mode
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode
allows the system to silently perform unattended tasks while in a low-power mode that appears off
(Default: Disabled)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card,
PCI Express graphics card, or the onboard VGA.
PCI Slot
OnChipVGA
PEG
Surround View
Enables or disables the Surround View function. This option is configurable only if an ATI graphics
card is installed. (Default: Disabled)
Graphics Display Mode
Specifies the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI.
D-SUB/DVI
D-SUB/HDMI Sets the D-SUB/HDMI as the graphics display.
Internal Graphics Mode
Auto
Disabled
Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default)
, 32MB, 64MB, 128MB, 256MB, 512MB.
Current UMA Size
When Frame Buffer Size is set to Auto, this item will show the system memory size automati-
cally allocated for the onboard graphics controller. If you manuanlly change the Frame Buffer
Size, this item will show the memory size you set.
GA-MA74GM-S2H Motherboard
Sets the PCI graphics card as the first display. (Default)
Sets the onboard VGA as the first display.
Sets PCI Express graphics card as the first display.
Sets the D-SUB/DVI-D as the graphics display. (Default)
Outputs from the onboard VGA if no PCI Express VGA card is installed. Always
outputs from the PCI Express VGA card when a PCI Express VGA card is
installed. (Default)
Always disables the onboard VGA, whether or not a PCI Express card is
installed.
- 38 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents