Advertisement
String Up Mode (All Strings)
Here's the procedure for changing all strings at the same time.
1. After installing all strings as described previously, pull out the MCK and turn it counter-
clockwise until the b# symbol lights blue. The Display Matrix will also shine blue, because Dark
Fire is in the Blue Bank.
2. Press the Display Matrix momentarily. It will shine green to indicate Dark Fire is in the Green
Bank.
3. Turn the MCK to the Revolving Arrow position.
4. Now press the MCK's Display Matrix and hold it in the pressed state until the String LEDs all
shine red. Gently tap the strings against their Piezo saddles, and their corresponding
Powerheads will start to turn and place tension on the strings.
5. Once there is enough tension on the strings for them to approach pitch, gently strum the
strings. Pause briefly between strums to allow the Powerheads to turn. The strings' LEDs will
change colors to indicate status until they turn green, which indicates the strings have reached
pitch.
6. Push the MCK all the way in to turn off, then pull the MCK out to go into Instantly Activated
Tuning mode. Go through the standard tuning procedure to "touch up" each string and achieve
final tuning.
Advertisement
